Kramer WP572W

The WP−572 is a PoC DGKat™ twisted pair receiver for HDMI signals. The
WP−571 converts an HDMI signal to a single twisted pair signal and the
WP−572 converts the twisted pair signal back to an HDMI signal.

* Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
* HDTV Compatible.
* HDCP Compliant.
* DGKat™ Signal Integration — Kramer’s unique technology for
converting TMDS as well as control and communication to signals that
run over twisted pair cables.
* HDMI Support — x.v.Color™, up to 7.1 Uncompressed Audio Channels.
* 3D Pass–Through.
* System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft)
at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission
range depends on the signal resolution, graphics card and display
used. If using third–party shielded CAT cables, both ends of the
shield must be soldered to the connectors for the products to
function properly.
* EDID PassThru — Passes EDID signals between the source and display.
* ON LED — Lights red when receiving power only, orange when either
input or output and power are attached, and green when both an active
input and output are attached.
* Power Connect™ System — A single connection to the transmitter
powers the receiver.
* Dimensions — 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H.
* Wall Plate Size — 1 gang US.